Patio and outdoor

Outside, the weather is the specification

A Kansas City patio goes from a hundred degrees in July to a hard freeze in January and back again. Everything about an outdoor coating follows from that.

The conditions

Freeze-thaw is what actually destroys outdoor concrete

Water gets into the surface of a slab, freezes, expands and pushes a thin layer off. Do that forty times a winter and the top of the concrete starts coming away in flakes. That is spalling, and it is the single most common reason a Kansas City patio looks tired.

An outdoor system is chosen to keep water out of the surface and to stay flexible enough to move with the slab instead of cracking off it. UV stability matters just as much, because a coating that is not stable goes yellow and chalky in one summer.

  • UV stable, so it does not yellow or chalk
  • Built to move with the slab through freeze-thaw
  • Textured for grip when wet
  • Resists pool chemicals and de-icing salt
Textured flake coating running across a wide concrete surface
2004Installing since
Where it goes

Three outdoor surfaces, three different problems

They look like the same job from the kerb and they are not.

Patios

Full sun, furniture dragged across it, and a barbecue that drips. Texture and UV stability do the work here.

Porches and steps

Wet feet, and a step edge that is the highest consequence surface on the property. Grip is not optional.

Pool decks

Constantly wet, chlorinated, and walked on barefoot. Slip resistance and chemical resistance both, with a surface that does not burn underfoot.

What it fixes

The state most outdoor slabs are in

Nearly every outdoor enquiry is one of these six.

Spalling

The surface flaking away after years of freeze-thaw. Ground back, repaired, then sealed so water cannot get in again.

Staining

Barbecue grease, leaf tannin, rust from furniture feet. All of it sits on the surface of a sealed floor.

Slipperiness

Smooth or sealed concrete when wet. A textured broadcast finish gives grip back.

Fading

Anything not UV stable goes yellow in a Kansas City summer. These topcoats do not.

Cracking

Repaired properly at the prep stage, with a system that can move rather than one that shatters.

Mismatched patchwork

Old repairs and different pours read as one surface once it is coated.

Recent work

Floors like this one

Textured flake coating running across a wide concrete surface
Textured flake coating running across a wide concrete surface
Blue blend flake epoxy garage floor in a residential garage
Blue blend flake epoxy garage floor in a residential garage
Metallic epoxy floor with deep pigment movement in a residential entry
Metallic epoxy floor with deep pigment movement in a residential entry
Working outside

What is different about an outdoor job

Same four steps, different constraints, and a weather window that is real.

2004Installing since
1-3Days on site
11Cities covered
Request a Quote
01

The weather window

Temperature and dew point both have to be right for the cure. Outdoor work gets scheduled around the forecast rather than squeezed into it.

02

Drainage comes first

If water is pooling on the slab, that is fixed or accounted for before anything is coated. A coating over standing water is a coating that fails at that spot.

03

Texture is mandatory

An outdoor surface without an anti slip texture is a liability, especially on steps and around a pool.

04

Edges and expansion joints

They move more outside than in. Joints are honoured rather than coated straight over, so the coating cracks where the slab does and nowhere else.

What a customer said

Glens crew never dissapoints we purchased another property and hated the flooring we had we have Glen a call he came right out his prices are fair and the work was even better thank you unique epoxy designs for coming through for us once again

C
c Cain Google review
Questions

Outdoor coating questions

Blue blend flake epoxy garage floor in a residential garage
Ask Glen directly 816-500-1161 Monday to Friday 7am to 6pm Request a Quote
Instant quote

Tell us the space. We will price it.

Four questions about the floor, then your details. Glen reads every one of these himself and comes out to measure before anything is final.

  • Free, no obligation estimate
  • Measured on site, not guessed
  • Residential and commercial
  • Missouri and Kansas
  1. 01

    You send the space

    Type, rough size and what it is used for.

  2. 02

    Glen calls back

    Usually the same working day, from the number below.

  3. 03

    He measures on site

    Then you get a fixed price, not a range.

Would rather talk it through? Call 816-500-1161, Monday to Friday 7am to 6pm.

Request a Quote

Takes about a minute.

Get the floor measured this week

Free estimate, on site, from the owner.