It carries the lighting
A gloss or satin floor bounces the spots back onto the product. Retail lighting schemes are designed assuming that and then land on a matt floor that eats it.
Durable and slip resistant, designed to hold up under constant foot traffic while staying out of the way of what you are selling.
A retail floor wears in a pattern: hard down the main run, hard at the door and barely at all under the fixtures. With tile or vinyl that shows as a track of dull, scuffed material through the middle of your shop within a couple of years.
A seamless resin floor wears evenly and can be refreshed in the worn zone without replacing the whole area. It also removes every joint a trolley wheel or a heel can catch.
It is the largest single surface a customer sees and the one most often ignored in a fit out.
A gloss or satin floor bounces the spots back onto the product. Retail lighting schemes are designed assuming that and then land on a matt floor that eats it.
No thresholds, no trims and no transitions between departments. Fixtures can be moved anywhere without leaving a scar.
A metallic pour in an entrance does the work a piece of art would, at a fraction of the cost, and nobody can copy it exactly.
The same systems as everywhere else, weighted toward appearance retention rather than chemical resistance.
A topcoat chosen so the main run does not go dull before the rest of the floor does.
Anti slip texture in the first few metres, where wet shoes come off the street.
Worked to your palette rather than to a manufacturer range.
Departments and walkways defined in the floor, with no physical join.
Scheduled around trading hours, in phases where the shop has to stay open.
The worn zone can be re-coated years later without lifting the whole floor.



Retail almost never gets a proper shutdown, so the work is planned around the trading pattern.
Hoard off a section, do it, move on. Slower overall and it keeps the tills open.
Overnight and early morning where the cure times allow it, so the shop opens on a floor that was bare the evening before.
Moved and returned as part of the plan rather than worked around, which is what leaves the untreated squares you can see forever.
Grinding is done with vacuum shrouding. In a stocked shop, dust is the thing that actually costs you money.
Im glad to say we hired glen and his crew to get our project done this is our third time using Unique epoxy designs they were fast efficient as always floors turned out amazing my husband loved it so much We are opening our salon in a few weeks I cant wait till glen and his team gets done Unique epoxy never dissapoints

With proper surface prep and professional installation, 10 to 15 years or longer, even in high traffic commercial environments.
Very little. Dust mop it and wet mop it occasionally. It resists stains, chemicals and moisture, so there is no sealing or stripping to keep up with.
Often yes, depending on the system and how fast it has to be back in service. It is one of the first things settled when the job is priced.
It is dusty work, done with vacuum shrouding and hoarding. In an occupied shop the area is isolated and the stock is protected before anything starts.
Yes. Solid colours are matched, and flake blends and metallics can be worked toward a palette rather than picked from a chart.
Four questions about the floor, then your details. Glen reads every one of these himself and comes out to measure before anything is final.
Type, rough size and what it is used for.
Usually the same working day, from the number below.
Then you get a fixed price, not a range.
Would rather talk it through? Call 816-500-1161, Monday to Friday 7am to 6pm.
Takes about a minute.
Free estimate, on site, from the owner.